Printer Features; Control Panel; Button; Panel Lamp - Star Micronics SM-S230I Series Hardware Manual

3. Printer Features

3.1 Control Panel

③
POWER Lamp

3.1.1 Button

① POWER Button :
Pressing and holding the POWER button for 5 seconds or more will turn the power on or off.
② FEED Button :
When the printer is on, pressing and holding the FEED button for 1 second or more feeds a paper.
 Pressing the ① POWER button and ② FEED button simultaneously enables you to change the
printer mode setting.
The buttons are also used to change the mode and change over the setting contents.
(For more details on the mode setting, refer to "3.3. Memory Switch Setting".)

3.1.2 Panel Lamp

③ POWER (Green) :
④ ERROR (Red) :
⑤ Bluetooth lamp (Blue): iOS  Always turns on during Bluetooth pairing.
⑥ Battery lamp (Green):
①
POWER Button
Printer is ON and ready to receive data.
When the memory switch is set, it indicates the printer mode to be
set by flashing by a predetermined number of cycles.
Indicates an error has occurred.
When the memory switch is set, it indicates the current setting contents
by flashing by a predetermined number of cycles.
Android / Windows  Only turns on when communication occurs
The lamp flashes while data receiving is in progress.
Indicates the battery charge level.
When the battery lamp dims, charge the battery.
* If the printer is operated with a low battery charge level, the paper
feed operation is not performed correctly resulting in narrower line
spaces.
･･･ Indicates that the battery charge level is sufficient.
･･･ Indicates that the battery charge level is decreasing.
･･･ Indicates that the battery charge level is extremely low.
⑤
Bluetooth Lamp
⑥
Battery Lamp
during Bluetooth pairing.
Charge the battery.
Immediately stop using the printer and charge the battery.
- 20 -
④
ERROR Lamp
②
FEED Button