Register Your Printer; Technical Assistance - Brady BMP 21-plus Quick Start Manual

Label printer
Hide thumbs Also See for BMP 21-plus:
Table of Contents

Advertisement

REGISTER YOUR PRINTER

Register your printer online at www.bradycorp.com/
register.

TECHNICAL ASSISTANCE

For troubleshooting and FAQs, visit:
http://www.qualityserviceandsupport.com/brady
Other techncial assistance
contact numbers can be
found on the back cover of
this manual. When
contacting a
representative, have your
serial number (located
inside the cartridge bay)
available.
BATTERIES
1. On the back of the printer, squeeze the finger tabs
located on both sides of the battery compartment door,
then swing the battery compartment door up and out.
(The door will come off.)
2. Insert 6 AA alkaline batteries or the optional BMP21-
PLUS-BATT rechargeable battery pack. (Do not use
rechargeable AA batteries or Ultimate Lithium AA bat-
teries).
Note: The lithium Ion battery pack accessory cannot
be charged within the printer.
3. Re-insert the battery door hinge at the top of the com-
partment and push down on the battery compartment
door, snapping it into place.
®
BMP
21-PLUS
English
1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents