Intermec UVE 10 PB21 User Manual page 18

Chapter 1 — Using the PB21 and PB31 Mobile Receipt Printer
To change the printer language using ESC/P and a communications
program
2 Start a communications program like HyperTerminal.
3 Enter U-shell. Press the ESC key and type:
4 Send the enable administrator rights command:
5 Send the run command to change the printer language:
To change the printer language using the display and Fingerprint
2 Press
3 Press
4 Press until you reach CMD Language.
5 Press
6 Press
7 Press
8 Cold boot the printer:
To change the printer language using the display and IPL
2 Press
3 Press
4 Press
5 Press
6 Press
8
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
1 Connect your printer to your PC using a serial cable. For help, see
"Connecting the Printer Through the Serial Port" on page
{SYS:USH}
su -p pass admin
setlanguage IPL -r
1 Press the Setup button. The Setup menu system appears
until you reach Print Defs.
to enter the Print Defs menu system.
to enter the CMD Language menu system.
until you see the language of you want to select.
to select the language.
a Remove the printer battery.
b Replace the printer battery.
c Turn the printer on.
1 Press the Setup button. The Setup menu system appears.
until you reach Test/Service.
to enter the Test/Service menu system.
until you reach CMD Language.
to enter the CMD Language menu system.
until you see the language of you want to select.
V10 CONSUMIBLES S.L.
PB21 and PB31 Mobile Receipt Printer User Guide
29.