Intermec UVE 10 PB21 User Manual page 75

Wireless Communications Settings Differences (continued)
Setting
EAP_TYPE
.SERVER_CN1
.SERVER_CN2
TTLS_USER
WPA, WPA2, or WPA/
WPA2_MIXED
PB21 and PB31 Mobile Receipt Printer User Guide
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
Current Radio
Sets the type of 802.11 network
authentication on the printer:
•
None
•
WEP
•
Pre-Shared Key
•
PEAP
•
TLS
•
TTLS
•
LEAP
•
EAP-FAST
When SECURITY TYPE is set to
TTLS or PEAP, specifies the name of
the certificate on the primary
authentication server. If
.SERVER_CN1 is not set,
.SERVER_CN2 is used. If
.SERVER_CN2 is also not set, any
common name is accepted.
When SECURITY TYPE is set to
TTLS or PEAP, specifies the name of
the certificate on the primary
authentication server.
When SECURITY TYPE is set to
TTLS, sets the TTLS out name.
WPA enables the WPA security
mode, and WPA2 enables the WPA2
security mode.
V10 CONSUMIBLES S.L.
Appendix A — Specifications
New Radio
Sets the type of 802.1x network
authentication on the printer:
•
OFF (default)
•
PEAP
•
TTLS
•
LEAP
•
EAP-FAST
•
EAP-TLS
Not Supported
Not Supported
Not Supported
WPA enables the WPA security
mode, and WPA2 enables the WPA2
security mode.
WPA/WPA2_MIXED enables mixed
WPA/WPA2 security mode, so the
printer can connect to the access
point in either WPA mode or WPA2
mode. This mode is backward
compatible with WPA.
65