Section 3 - Configuration
Each of the eight main categories display various hidden administrator parameters and settings.
Each of the eight main categories display various hidden administrator parameters and settings.
Choose from drop down list country where
Select a Country:
device is located.
The Nuclias Connect section is used to create a set of APs on the Internet to be organized into a single group in order to increase ease of man-
agement. Nuclias Connect and AP Array are mutually exclusive functions.
Click the drop-down menu to enable or disable
Enable Nuclias Connect:
Nuclias Connect.
Note: To save the new configuration settings to the firmware, click
Configuration > Save and Activate, otherwise click Discard Changes to
delete any setting change.
D-Link DAP-X2850 User Manual
Status is enabled by default. Uncheck the
box to disable DDP control.
Select on/off for the Router Status.
Select which port as WAN Port.
Nuclias Connect Settings
DDP Setting
Router Settings
Country Setting
79