Related Manuals for D-Link Nuclias Connect DAP-X2850
Summary of Contents for D-Link Nuclias Connect DAP-X2850
- Page 1 Quick Installation Guide Nuclias Connect AX3600 Access Point DAP-X2850 Additional documentation is also available on the D-Link website...
- Page 2 Contents English...
-
Page 3: Before You Begin
Figure 1: Front Panel LED If any of the above items are damaged or Description missing, please contact your local D-Link reseller. Green (Solid) - Device operational Red (Flashing) - Device booting Note: Using a power supply with a different... -
Page 4: Interface Connectors
LAN (PoE) 2.5 Gbps Ethernet port for data and Port Power over Ethernet (PoE) power. Note: D-Link recommends manually configuring Input for the power adapter; the device before mounting it. The management however, the device can also be computer, DHCP server and DAP-X2850 must be powered over Ethernet. - Page 5 Log in to the administration user Plug the Ethernet cable into the LAN (PoE) port of the device. Note: If you are interface. The default login information is powering the device with a power adapter, Username: admin plug the adapter into the Power Input port. Password: admin Connecting Wirelessly Connect the management computer to...
- Page 6 Figure 6: Attaching the Mounting Plate Use the included screws to secure the mounting plate to the ceiling brackets. Plug the Ethernet cable into the LAN (PoE) port of the device. Note: If you are powering the device with a power adapter, plug the adapter into the Power Input port.
-
Page 7: Federal Communication Commission Interference Statement
Appendix - Statements ErP Power Usage This device is an Energy Related Product (ErP) that automatically switches to a power-saving Network Standby mode within 1 minute of no packets being transmitted. It can also be turned off through a power switch to save energy when it is not needed. Network Standby: 5.065 watts Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant... - Page 8 Operations in the 5.15-5.25GHz band are restricted to indoor usage only. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 42cm between the radiator & your body. NCC警語: 取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用者均不得擅自變...
- Page 9 Ver. 1.00(WW)_130x183 2020/05/14...