Setting the Print Density
If your machine is printing too light or too dark, you can adjust the print
density level. The new setting will remain until you change it again.
1
Press Menu until you see 1.INITIAL SETUP.
2
Press 1 on the numeric keys to select it.
3
Press Menu repeatedly until you see 3.PRINT DENSITY.
4
Press 3 on the numeric keys to select it.
5
Press a numeric key to select the option you want.
1.LOW2.MID3.HIGH
6
Press Stop to exit.
Toner Save
You can conserve toner using this feature. When you set Toner Save to
ON, print appears somewhat lighter. The default setting is OFF.
1
Press Menu until you see 1.INITIAL SETUP.
2
Press 1 on the numeric keys to select it.
3
Press Menu repeatedly until you see 4.TONER SAVE.
4
Press 4 on the numeric keys to select it.
5
Press a numeric key to select the option you want.
1.ON 2.OFF
6
Press Stop to exit.
Checking the Drum Life
You can see the percentage of the drum's life that remains available.
1
Press Menu until you see 1.INITIAL SETUP.
2
Press 1 on the numeric keys to select it.
3
Press Menu repeatedly until you see 6.DRUM LIFE.
4
Press 6 on the numeric keys to select it.
5
Press Stop to exit.
Even if the remaining drum life is 0%, you may continue to use the drum
unit until you have a print quality problem.
13
A S S E M B L Y