Table of Contents
Advertisement
63
T R O U B L E S H O O T I N G A N D M A I N T E N A N C E
In this case, please install the machine printer driver again or copy BI-
DI.386 from the CD-ROM to the Windows/System directory. (NOTE:
BI-DI.386 on Disk 1 is not compressed.)
HP LaserJet series II, IID, IIP, IIP+, III, IIID or IIIP:
®
If Microsoft Windows
Printing System for above models are used, you
have to modify the "win.ini" file which is in the Windows directory to
turn the printer's bi-directional function off.
We recommend you take a back-up before you modify the WIN.INI or
SYSTEM.INI, just in case.
Open the file "win.ini" by using the "Notepad" application. You can find
the following statement in the [spooler] section.
[spooler]
QP.LPT1 = wpsljqp.dll
To disable this function, put a semicolon at the start of the sentence as
follows;
[spooler]
;QP.LPT1 = wpsljqp.dll
Then, open the file "system.ini" by using the "Notepad" application. You
can find the following statement in the [386Enh] section.
[386Enh]
device=wpsljvpd.386
WPSLPT1=1
To disable this function, put a semicolon at the start of the sentences as
follows;
;device=wpsljvpd.386
;WPSLPT1=1
®
You must restart Windows
to make these modification effective.
The modification disables the printer status reporting on your PC,
however, you will be able to use the machine with no further problems.
HP LaserJet 4 Plus:
Please uninstall the Main Status windows by double clicking the Un-
install Status windows in HP LaserJet group.
NEC SuperScript 610/660:
Please remove the NEC SuperScript driver by having NECDELET.EXE
file in Disk 1 that is included with NEC printers.
Advertisement
Table of Contents
