Table of Contents
Advertisement
39
P R I N T I N G
Two-Sided Printing (Manual Duplexing)
®
The supplied printer driver for Windows
3.1, 3.11 and 95, 98 and for
®
Windows NT
Workstation Version 4.0 enables manual duplex printing.
(For more information, see the Help screen for the printer driver.)
If you are using Parallel Cable, please select LPT1 on the printer driver.
The machine prints all the even-numbered pages on one side of the paper
®
first. Then, the Windows
driver instructs you (with a pop-up message)
to reinsert the paper. Before reinserting the paper, straighten it well to
prevent paper jams, or you may get a paper jam. Very thin or very thick
paper is not recommended.
When using the manual duplex function, it is possible that a paper jam
may occur more frequently and the printer quality may be reduced.
Manual Feed Slot
See
"Printing on
Your machine has a manual feed slot above the paper cassette. You can
Envelops,
load an envelope or special print media one at a time into this slot. You
Thicker
do not have to remove paper from the paper cassette. (For information
Paper and
about acceptable paper see, "Printing on Envelops, Thicker Paper and
Card Stock"
in this
Card Stock." in this chapter.) Insert the sheet of paper with the side you
chapter
wish to print on face up in the manual feed slot.
Use the manual feed slot to print or copy on labels, envelopes, card stock
or thicker paper.
If you use labels and envelopes, they must be of a type suitable for use
with a laser printer. If you use incorrect types it is possible to damage or
contaminate the drum surface and cause printing problems.
Advertisement
Table of Contents
