Installing A Management Module - Huawei FusionServer G5500 User Manual

FusionServer G5500 Server
User Guide
Figure 6-53 Location of the RTC battery
Step 5 Hold the RTC battery with the side marked with texts facing upwards, insert the left end of
the RTC battery into the slot, and gently press down the RTC battery until it is properly
installed in the slot. See
Figure 6-54 Installing the RTC battery
----End

6.8.2 Installing a Management Module

Step 1 Determine the location for installing the management module in the G5500, as shown in
Figure
Step 2 Take a spare management module out of its ESD bag.
Step 3 Insert the management module into the slot. See (1) in
If only one management module is configured for a full-length compute node, install the management module
in the slot MM1, as shown in
Issue 02 (2017-12-15)
Figure
6-55.
NOTE
Figure
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6-54.
Figure
6-55.
6 Optional Part Installation
6-55.
169