Installing G530 V2 Components; Installing The Node; Installing The Gp608 - Huawei FusionServer G5500 User Manual

FusionServer G5500 Server
User Guide

4.3.4 Installing G530 V2 Components

Before installing and initializing the G530 V2, install its components as required, such as
CPUs, hard disks, or DIMMs. For details, see

4.4 Installing the Node

4.4.1 Installing the GP608

Step 1 Before installing the GP608, ensure that no G560 is installed.
Step 2 Unpack the packing case.
1.
2.
3.
4.
Issue 02 (2017-12-15)
Check whether the packing case and seals are in good conditions.
NOTE
If there is any damage (for example, the package is soaked or deformed, or the seals or pressure-
sensitive adhesive tapes are not intact), submit a Cargo Problem Feedback Form.
Use a box cutter to cut the pressure-sensitive adhesive tape on the packing case.
CAUTION
Be careful with the box cutter to avoid personal injury or equipment damage.
Unpack the GP608.
If there are multiple GP608s, take them out from ESD bags and place them separately on
the ESD floor, as shown in
Figure 4-5 Correct operation
NOTE
Do not take out a GP608 from its ESD bag if you do not install it immediately.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6.4 G530 V2 Optional Part
Figure 4-5.
4 Setup
Installation.
55