Cpu - Huawei FusionServer G5500 User Manual

FusionServer G5500 Server
User Guide
Step 4 Lower the ejector lever until it is latched. See (2) in Figure 2.
Step 5 Check whether the hard disk is installed successfully by observing the hard disk indicator
status. For details, see
----End

6.4.2 CPU

Installing a CPU
Step 1 Power off G530 V2. For details, see
Step 2 Remove the G530 V2. For details, see
Step 3 Place the G530 V2 onto the ESD floor.
Step 4 Remove the cover. For details, see
Step 5 Determine the location for installing the CPU.
Figure 6-27
Figure 6-27 Numbering and locations of CPUs
Step 6 Take a spare CPU out of its ESD bag.
CPUs on the same server must have the same BOM number.
Step 7 Install a CPU carrier.
1.
Issue 02 (2017-12-15)
2.3 Front Panel Indicators and
shows the numbering and locations of CPUs.
NOTE
Take the new CPU carrier out of its ESD bag.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Buttons.
3.1 Powering Off the Compute
3.5 Removing a G530
Removing the Cover of a G530
6 Optional Part Installation
Node.
V2.
V2.
145