Enabling The Tpm/Tcm - Huawei 2288H V5 User Manual

2288H V5 Server
User Guide
Figure 5-56 Installing a TPM/TCM
Step 9 Tighten the screw on the TPM/TCM using a Phillips screwdriver. See (2) in
Step 10 Install the chassis cover. For details, see
Step 11 Install the server. For details, see
Step 12 Connect the power cables. For details, see
Step 13 Power on the server. For details, see
Step 14 Log in to the iBMC WebUI, and check whether the new component is normal. For details, see
the
----End

5.14.2 Enabling the TPM/TCM

Enabling the TPM
Step 1 Access the BIOS. For details, see
Step 2 Select Security.
Step 3 Select TPM Operation and press Enter.
Step 4 Select Enable.
Step 5 Press F10.
The Exit Saving changes? dialog box is displayed.
Step 6 Select Yes and press Enter.
Issue 04 (2018-09-04)
Huawei Rack Server iBMC User
Copyright © Huawei Technologies Co., Ltd.
3.5 Installing the Chassis
4.4 Installing the Server on Guide
5.4 PSU.
3.1 Powering On the
Guide.
4.6.8 Configuring the
5 Optional Part Installation
Figure
Cover.
Rails.
Server.
BIOS.
5-56.
165