Usable Detachable Power Supply Cord Set - Leica DVM5000 Setup Manual

Specifications and Dimensions
Model Input Connector
North 100 – IEC60320 C-13 Rated 5 A,
America 120 V 125 V UL, CSA Approved
<*1>
<*2>
200 – IEC60320 C-13 Rated 3 A,
240 V 250 V UL, CSA Approved
Europe 100 – IEC60320 C-13 Rated 3 A,
<*2> 240 V 250 V <*1>
U.K. 100 – IEC60320 C-13 Rated 3 A,
<*2> 240 V 250 V
Note: * 1. Be sure that the detachable proper Supply cord has the approval
of the appropriate safety agencies of the country where the
equipment will be used.
* 2. Cable length of above Power Supply cord shall be shorter
than 3 m.
Leica DVM-series
Cord
Type
SV, SVE, SV0, SV00, SVT, SVT0, SVT00, SP-3, SPE- 3,
SPT-3, SJ, SJE, SJ0, SJ00, SJT, SJT0, SJT00, S, SE, S0,
S00ST, ST0, ST00, No.18 AWG Min. 3-Conductors
(Single phase; 2-current carrying conductors &
ground) UL, CSA Approved
Type
SV, SVE, SV0, SV00, SVT, SVT0, SVT00, SP-3, SPE- 3,
SPT-3, SJ, SJE, SJ0, SJ00, SJT, SJT0, SJT00, S, SE, S0,
S00, ST, ST0, ST00, No.18 AWG Min. 3-Conductors
(Single phase; 2-current carrying conductors &
ground) UL, CSA Approved
CENELEC 0C
3 X 0.75 square mm <*1>
<HAR>
BS OC 3 X 0.75 square mm
Setup Manual
Attachment
Plug cap
NEMA (5-15P)
parallel blade
Rated 5 A, 125 V
UL, CSA
Approved
NEMA (6-15P)
tandem blade
Rated 3 A, 250 V
UL, CSA
Approved
Rated 3 A,
250 V
<*1>
Rated 3 A, 250 V
or
40