Editor's Note - Leica DVM5000 Setup Manual

Editor's Note

Page Format
1
Connecting Peripheral Devices
Connecting a Camera and Lens
Attaching a Lens (Option) to the Camera
Fiber cable
Lens Camera head
Camera head mount dial
5
Lock screw
Connecting the Dedicated Cable of the ACS Compatible Lens (Option)
Insert the dedicated cable supplied with the ACS
compatible lens into the ACS connector on the KH-7700.
For the connection method for the ACS compatible
lens and dedicated cable, refer to the instruction manual
supplied with the lens.
ACS compatible lens
* The illustration shows MXF-10C.
Leica DVM-series Setup Manual
Notational Conventions
In this manual, menu items displayed on the screen are enclosed with [ ].
Submenus are separated using "/".
Visual Aids
Indicates points that are important to achieve the full product perfor-
mance, such as operational precautions and application procedures.
Indicates pages where related information can be found.
Leica DVM-series
3
1
Insert the lens into the end of the camera head.
If a cap has been attached, remove it.
When attaching a lens that connects the fiber
cable directly, remove the fiber cable using the
hexagonal wrench (supplied with the lens).
For details, refer to the instruction manual of
the lens.
6
2
Turn the camera head mount dial.
3
Turn the lock screw to fix the lens to the camera
head.
5
22
2
Connecting Peripheral Devices
Mounting the Lens (Option) to the Stand (Option).
4 For the connection method for the ACS
compatible lens and dedicated cable, refer
to the instruction manual supplied with
the lens.
5
Leica DVM-series Setup Manual
Header
1
Indicates the contents of the page.
Header (Header)
2
Given on page 2 and subsequent pages.
Cross-header
3
Overview
4
Describes the overview and operation flow of the section.
Illustration and screen
5
Shows illustration and screen relating to the operation procedure and
explanation.
Operation procedure and supplementary explanation
6
Explains the operation procedure and the status resulting from
execution of the operation. Helpful information regarding operation
and reference pages is introduced here using symbols.
Setup Manual
1
Place the stand
mounting fixture to
the mounting position on
the stand.
2
Tighten the lens
mounting screw to
secure the lens to the
Mounting position
stand.
Stand mounting fixture
5
Connecting the Camera Cable
Hold the camera cable plug with the slit facing up, insert the plug into
the connector, and then turn the screw to secure the plug.
5
To disconnect the plug, loosen
the screw and pull the plug out straight.
Connecting the Fiber Cable
Insert the fiber plug into the light source connector, and turn the fixing
ring to secure the fiber plug.
5
Fixing ring
23
10