Bosch Solution 6+6 Wireless AE Quick Reference Manual page 19

Solution 6+6 Wireless - AE
The following DIP Switch setting and locations must be programmed for the two "Area Addressable" codepads to function
correctly.
Area 1 Codepad
DIP Switch 1 on the back of the remote codepad will need to be in the "ON" position. The following location will also
need to be programmed.
[LOCATION 182, Option Bit 1 must be enabled]
Area 2 Codepad - (Output 1)
DIP Switch 2 on the back of the remote codepad will need to be in the "ON" position. The following locations for Output
1 will also need to be programmed.
[LOCATION 140 = 6, LOCATION 141 = 1]
Quick Reference Guide
Bosch Security Systems Pty Limited
ISSUE 1.00
Page 19