Connecting Water Supply Hose - LG WT7800C Series Service Manual

2-2. CONNECTING WATER SUPPLY HOSE

Before connecting the water supply hose to the water tap, check the hose type and then choose the
correct instruction here below.
Screw Type
1
Attach the water supply hose to the tap.
Push the water supply hose up so that the rubber packing
within the hose can adhere completely to the tap.
2
Connect the water supply hose to the tap.
Connect the water supply hose to the tap and then tighten it by
screwing it to the right.
3
Check water leakage.
After connecting the hose, open the tap to check for
any water leakage.
Connecting Water Supply Hose to the Machine
• Connect the water supply hose to inlet valve of
the washing machine, and then lock it by turning
the hose connecting part.
• Check to see if there is a rubber seal inside the
connector.
• A new washing machine should be installed with
new hoses. The old hoses should not be reused.
• Replace hoses every 5 years.
6
Water tap
Rubber Seal
Water Supply Hose
Hot water inlet
Cold water inlet
Copyright © 2016 - 2017 LG Electronics Inc. All rights
reserved. Only training and service purposes.