LG WT7800C Series Service Manual page 26

7) Disassembly of the Back Cover and
Drain Pump
■ Remove the screws that attach the back cover and
take it off.
■ Disconnect the leads and the drain hose from the
drain pump.
■ When remove the pump attachment screws on the
bottom of cabinet, tilt the washing machine.
■ Remove the lead connector.
■ After push the hooks near pump legs, remove the
BLDC Pump
Caution
Holder should be assembled
like next (right) pictures.
The angle between guide
part and holder should be 90
deg.
8) Disassembly of Rotor and Stator
Use a wrench (M14) to remove the nut that
■
connects the rotor to the shaft.
(The torque should be 250 kgf/cm or 88 foot-
pounds.)
■ Remove the rotor by pulling it straight off the
splined shaft.
26
Copyright © 2016 - 2017 LG Electronics Inc. All rights
reserved. Only training and service purposes.