LG WT7800C Series Service Manual page 25

Inner
Tub Cap
4) Disassembly of Tub Cover and Pulsator
① Remove separate hooks fixed with upper of outer tub and take off the tub cover.
② emove the pulsator cap.
③ Remove the pulsator screws.
④ Remove the pulsator washer.
5) Assemble the service tool (38 mm wrench)
6) Remove the hub attachment nut. (38 mm)
 Hit the bar using the hammer.  Disconnect hub nut and disassemble the inner tub.
Tub Cover
Pulsator Cap
Pulsator
Screw
Pulsator
25
Pulsator
Inner Tub Cap
Shaft
Rotor Nut Stator
Hub Attachment Nut
Copyright © 2016 - 2017 LG Electronics Inc. All rights
reserved. Only training and service purposes.
Hub Fixing Nut
Outer Tub
Inner Tub
Bearing Housing ASM
Rotor