Brother MFC-215C User Manual page 177

Fax tones The signals sent by sending and receiving fax machines
while communicating information.
Fax/Tel You can receive faxes and telephone calls. Do not use this
mode if you are using a telephone answering device (TAD).
Fine resolution Resolution is 203 x 196 dpi. It is used for small print
and graphs.
Grey scale The shades of gray available for copying and faxing
photographs.
Group number A combination of Speed-Dial numbers that are
stored in a Speed-Dial location for Broadcasting.
Help list A printout of the complete Menu table that you can use to
program your machine when you do not have the User's Guide
with you.
Journal Period The pre-programmed time period between
automatically printed Fax Journal Reports. You can print the Fax
Journal on demand without interrupting the cycle.
LCD (liquid crystal display) The display screen on the machine
that shows interactive messages during On-Screen Programming
and shows the date and time when the machine is idle.
Manual fax When you lift the handset of your external telephone so
you can hear the receiving fax machine answer before you press
Mono Start
Menu mode Programming mode for changing your machine's
settings.
OCR (optical character recognition) The bundled ScanSoft
®
OmniPage software application converts an image of text to text
you can edit.
Out of Paper Reception Receives faxes into the machine's
memory when the machine is out of paper.
Overseas Mode Makes temporary changes to the fax tones to
accommodate noise and static on overseas phone lines.
Pause Allows you to place a 3.5 second delay in the dialling
sequence stored on Speed-Dial numbers. Press
as many times as needed for longer pauses.
Colour Start
or to begin transmission.
®
Redial/Pause
GLOSSARY G - 3