Understanding The Error Messages; Using Photocapture Center - Brother MFC-215C User Manual

Understanding the Error Messages

Once you are familiar with the types of errors that can occur while
™
you're using the PhotoCapture Center , you can easily identify and
troubleshoot any difficulties.
When an error message appears on the LCD, the machine will beep
to get your attention.
This message will appear if you insert a media card
Media Error —
that is either bad or not formatted, or when there is a problem with
the media drive. To clear this error, take out the media card.
This message will appear if you try to access a media
No File —
card in the drive (slot) that does not contain a .JPG file.
This message will appear if you are working with
Out of Memory —
images that are too large for the machine's memory.
™

Using PhotoCapture Center

from
your PC
You can access the media card that is in the media drive (slot) of the
machine from your PC.
™
(See PhotoCapture Center
on page 7-1 in Software User's Guide
™
on the CD-ROM or PhotoCapture Center
on page 12-2 in the
Software User's Guide on the CD-ROM.)
™
WALK-UP PHOTOCAPTURE CENTER 9 - 15