Setup Receive; Basic Receiving Operations; Choosing The Receive Mode - Brother MFC-215C User Manual

4

Setup Receive

Basic receiving operations

Choosing the Receive Mode

There are four different Receive Modes for your machine. You can
choose the mode that best suits your needs.
LCD
Fax Only
(automatic receive)
Fax/Tel
(fax and telephone)
(with an external or
extension telephone
for models without a
handset)
External TAD
(with an external
answering machine
only)
Manual
(manual receive)
(with an external or
extension telephone
for models without a
handset or with BT Call
Sign)
How it works
The machine
automatically answers
every call as a fax.
The machine controls the
line and automatically
answers every call. If the
call is a fax it will receive
the fax. If the call is not a
fax it will ring
(pseudo/double ring) for
you to pick up the call.
The external answering
machine (TAD)
automatically answers
every call.
Voice messages are
stored on the external
TAD. Fax messages are
printed.
You control the phone
line and must answer
every call yourself.
When to use it
For dedicated fax lines.
Use this mode if you expect to receive lots of fax
messages and few telephone calls. You cannot
have an answering machine on the same line, even
if it is on a separate wall socket/phone socket on
the same line. You cannot use the telephone
company's Voice Mail in this mode.
Use this mode if you have connected an answering
machine to your machine.
The External TAD setting works only with an
external answering machine. Ring Delay does not
work in this setting.
Use this mode if you do not receive many fax
messages, use BT Call Sign, or if you are using a
computer on the same line.
If you answer and hear fax tones, wait until the
machine takes over the call, then hang up. (See
Fax Detect on page 4-4.)
SETUP RECEIVE 4 - 1