Using a cordless external handset
If the base unit of your cordless telephone is connected (see page
A-4) and you typically carry the cordless handset elsewhere, it is
easier to answer calls during the Ring Delay. If you let the machine
answer first, you will have to go to the machine so you can press
Tel/R
to transfer the call to the cordless handset.
Changing the remote codes
Remote activation lets you send commands to your machine from an
extension or external phone. To use Remote Activation, you must
turn on the remote codes.
The preset Fax Receive Code is
Answer Code is
If you are always disconnected when accessing your external
TAD remotely, try changing the Fax Receive Code and
Telephone Answer Code to another three-digit code (such as
###
998
and
1
If it is not illuminated in green, press
2
Menu/Set
Press
3
Press
▲
or
Menu/Set
Press
4
Enter the new Fax Receive Code.
Menu/Set
Press
5
Enter the new Telephone Answer Code.
Menu/Set
Press
6
Stop/Exit
Press
#51
.
).
2
1
4
,
,
,
.
▼
to select On (or Off).
.
.
.
.
51
. The preset Telephone
Fax
(
).
APPENDIX A A - 3