Table of Contents
Advertisement
3
When the BLUETREK® X3 is switched off, press and hold
the TALK button for about 7 seconds until the indicator light
flashes red and blue alternately. And a sound can be heard
in the speaker.
4
Once the mobile phone detects the headset, a "BLUETREK X3" message will be displayed.
Follow the phone instructions to accept the pairing. The PIN code (or passkey) is 0000, then
press "yes" or "ok" .
5
For some phones, you may need to select "Connect" .
BLUETREK X3
If you haven't started the discovery mode within 5 minutes, the headset will go to the standby
mode. You must then switch off your headset and start the pairing again.
If pairing was successful, the indicator light will switch to blue and flashes slowly.
The headset will connect automatically to the mobile phone.
5 I BLUETREK X3
BLUETREK X3
BLUETREK X3
"0000"
"Talk" button
BLUETREK X3
Connect
Assign short name
Set as unauthorised
Delete
Select
Cancel
Advertisement
Table of Contents
