Page 1
EN300 328-02 EN301 489-17 EN301 489-01 EN50371 EN60065 following the provisions of Radio Equipment and Telecommunication Equipment directive 1999/5/EC. November 2003 Guillaume Ponticelli , Business Development Manager 1 l Bluetrek G2 user guide...
Compliance to Industry Canada, technical specifications have been made in a declaration of conformity. It does not imply that Industry Canada approved the equipment. Bluetooth ® is a trademark owned by Bluetooth SIG, Inc. and is used by the manufacturer under license. Bluetrek G2 user guide l 2...
Page 4
® Your Bluetrek G2 will allow you to take a call, initiate a call (if your phone has voice controls), and adjust volume directly on your headset, without the need to touch your mobile phone. ® The Bluetrek G2 headset has 3 buttons: •...
Page 5
® G2 headset, you must: • Charge the headset; please refer to the “Charging Bluetrek • Pair the headset with a mobile phone. Please refer to the “Pairing Bluetrek manual. 1. Charging Bluetrek Your headset is delivered uncharged. So before the first use, you must fully recharge it for about 8 hours with the supplied charger, until the blue indicator light turns on.
Page 6
Before using the Bluetrek ® G2 headset, you must pair it with your Bluetooth ing is the process of linking 2 Bluetooth The pairing only needs to be done once. Afterwards, every time you switch on your headset, it will automatically connect to your mobile phone.
Press and hold the TALK button for about 2 seconds until the blue indicator light is on. A beep (2 tones) can be heard in the speaker. Release the TALK Button. If Bluetrek G2 is paired in the Hands Free profile, it will try to connect automatically to the paired Audio Gateway (e.g. mobile phone).
9. Redial Last Number Press the TALK button for about 2 seconds if there is no active call and no incoming call, until you hear a beep. This function only works in the Hands-Free Profile. Bluetrek G2 user guide l 8...
® 13. Transferring a call to Bluetrek During an active call on the mobile phone, press the TALK button briefly on the headset to transfer the call from the mobile phone to the headset. 9 l Bluetrek G2 user guide...
However, an incoming Call on any phone (primary or secondary) will be sent to your BlueTrek headset, and it can be answered on the headset (if BlueTrek G2 has no link established with the other phone which is not receiving the latest incoming call).
To find out more, please consult our website: www.bluetrek.com. An automatic reset is done each time the headset is either charged or switched off. So in case of problem or if your headset cannot switch off, please charge your headset for at least 30 seconds.