Advertisement
Quick Links
BLUETREK X2 user guide
Thank you for choosing the BLUETREK
convenience we are bringing to you. The BLUETREK
functions, please read this manual before getting started.
EC-Declaration of Conformity
We, Innovi Technologies Ltd of
31/F China Online Centre,
333 Lockhart Road,
Wan Chai, Hong Kong
declare under our sole responsibility that our product
BLUETREK X2-2
to which this declaration refers is in conformity with the appropriate standards
EN300 328-02
EN301 489-17
EN301 489-01
EN50371
EN60950
Following the provisions of Radio and Telecommunications Terminal Equipment
directive 1999/5/EC.
February 2006
Guillaume Ponticelli, Director of Development
FCC/ Industry Canada Notice
This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference. (2) This device
must accept any interference received, including interference that may cause undesired
operation.
In compliance with Industry Canada regulations, technical specifications have been
provided in a declaration of conformity. This does not imply that Industry Canada
approved the equipment.
Caution: Changes or modifications to this Bluetooth
by the party responsible for compliance could void the user's authority to operate it.
®
Bluetooth
is a trademark owned by Bluetooth SIG, Inc. and is used by the manufacturer under license.
PAGE 1 / 7
®
X2, we hope you will enjoy the
®
X2 offers many
®
headset not expressly approved
BEFORE USING YOUR HEADSET FOR THE FIRST TIME
-
You must charge it continuously for about 8 hours, until the red indicator light
turns off. Please refer to the "Charging the BLUETREK
manual.
-
Pair the headset with a mobile phone. Please refer to the "Pairing the
®
BLUETREK
X2" section of this manual.
Introduction
®
The BLUETREK
X2 headset is a wireless headset based on the Bluetooth
®
technology. It complies with Bluetooth
1.2 protocol, supporting Headset and Hands-
free profile.
®
The BLUETREK
X2 headset has 3 buttons:
• "TALK "button (main button),
•
1 "VOL+ "button,
• 1 "VOL- "button.
TALK button
VOL + button
Charging socket
PAGE 2 / 7
®
X2" section of this
®
Microphone
VOL - button
Speaker
Advertisement
Related Manuals for BlueTrek X2
Summary of Contents for BlueTrek X2
- Page 1 • 1 “VOL- “button. ® X2” section of this ® X2” section of this manual. ® X2 headset is a wireless headset based on the Bluetooth ® 1.2 protocol, supporting Headset and Hands- ® X2 headset has 3 buttons: TALK button...
- Page 2 7 seconds until the indicator light flashes red and blue alternately. And a sound can be heard in the speaker. 4. Once the mobile phone detects the headset, a “BLUETREK X2” message will be displayed. Follow the phone instructions to accept the pairing. The PIN code (or passkey) is 0000, then press “yes”...
- Page 3 To end the mute function When the microphone is muted quickly press the VOL+ button on the BLUETREK The periodic tone will end. PAGE 5 / 7 Transferring a call from BLUETREK During an active call, press the TALK button for about 2 seconds.
- Page 4 Read those guidelines before using your headset. ® BLUETREK X2 is protected against splashing water from all direction, which means that your headset can function with water falls. Nonetheless, precipitation, humidity and all types of liquid or moisture may contain minerals that will corrode electronic circuits.