BlueTrek Sugar-Clip User Manual page 13

3) Press and hold the "Vol-" button on your BLUETREK® sugar-clip headset for approx. 3
seconds, until the purple indicator light is on. (A beep can be heard in the speaker).
1 beep in the speaker and the blue indicator light will flash once if the number has been
stored in position 1.
OR
2 beeps in the speaker and the blue indicator light will flash twice if the number has been
stored in position 2.
If the number is incorrect, it will not store in the headset. You will hear a long low-tone beep
in the speaker and the red indicator light will flash twice.
Note:
- Only 1 telephone number can be stored at one time. To store the second number,
simply repeat from Step 2.
- Maximum of 2 favourite numbers can be stored and can be replaced by repeating the
above steps.
- Remember to change back your mobile phone name once you have stored the numbers.
Making a call to one of the stored numbers
1) Ensure your BLUETREK® sugar-clip headset is paired and connected with your phone.
2) Press and hold the "Vol +" button on your BLUETREK® sugar-clip headset until you hear:
-1 beep (or the voice alert if activated) to call your number stored in position 1;
-2 beeps (or the voice alert if activated) to call your number stored in position 2.
11 I BLUETREK sugar-clip