BlueTrek S2 User Manual

BLUETREK S2 user guide
IMPORTANT
®
Before using your Bluetrek S2 headset for the first time, you must charge it
continuously for about 8 hours, until the blue indicator light turns on. Please
®
refer to the "Charging Bluetrek S2" section of this manual.
EC-Declaration of Conformity
We, Innovi Technologies Ltd of
31/F China Online Centre,
333 Lockhart Road,
Wan Chai, Hong Kong
declare under our sole responsibility that our product
BLUETREK G3
To which this declaration is in conformity with the appropriate standards
EN300 328-02
EN301 489-17
EN301 489-01
EN50371
EN60065
following the provisions of Radio Equipment and Telecommunication Equipment
directive 1999/5/EC.
October 2004
Guillaume Ponticelli, Director of Development
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) This device
must accept any interference received, including interference that may cause undesired
operation.
Caution: Changes or modifications to this Bluetooth® headset not expressly approved
by the Manufacturer could void the user's authority to operate the equipment.
Industry Canada notice to users and product statements
To prevent radio interference to the licensed service, this device is intended to be
operated indoors and away from windows to provide maximum shielding. Equipment (or
its transmit antenna) that is installed outdoors is subject to licensing.
Compliance to Industry Canada, technical specifications have been made in a
declaration of conformity. It does not imply that Industry Canada approved the
equipment.
Bluetooth® is a trademark owned by Bluetooth SIG, Inc. and is used by the manufacturer under license.
PAGE 1 / 6
1. Introduction
®
The Bluetrek S2 headset is a wireless headset based on the Bluetooth
®
The Bluetooth technology is a standard for wireless short distance radio
communications. Devices like a headset and a mobile phone can communicate with
each other without wires within approximately 10 meters.
® ®
Bluetrek S2 is a qualified Bluetooth headset that complies with the Bluetooth
protocol. It supports two profiles: Headset profile and Hands-free profile.
®
It will work with any qualified Bluetooth device that supports the Headset profile or the
Hands-free profile.
®
To check the list of qualified Bluetooth mobile phones working with Bluetrek
please consult: www.bluetrek.com
®
The Bluetrek S2 headset can be used with a qualified Bluetooth
®
another Bluetooth device supporting the Headset or Hands-free profile. This user
guide focuses on the use of this Bluetooth
which is the most common application.
®
Your Bluetrek S2 will allow you to answer a call, make a call (if your phone has voice
controls), and adjust volume directly on your headset, without the need to touch your
mobile phone.
®
The Bluetrek S2 headset has 3 buttons:
• "TALK" button (central button),
• 1 "VOL+" button,
• 1 "VOL-" button.
®
Before using Bluetrek S2 headset, you must:
. Charge the headset; please refer to the "Charging Bluetrek
guide.
. Pair the headset with a mobile phone. Please refer to the "Pairing Bluetrek
section of this manual.
PAGE 2 / 6
®
technology.
®
1.1
®
S2,
®
mobile phone, or
® ®
headset with a Bluetooth mobile phone,
®
S2" section of this user
®
S2"