Answering A Call; Ending A Call; Adjusting The Volume; Muting The Microphone - BlueTrek Sense User Manual

Mobile without voice recognition
. Make sure both the headset and the mobile phone are ON and in stand-by mode.
. Dial the number on the phone keypad, after approximately 2 seconds the audio
connection will be established.
This function may not be available on some phones, please refer to the trouble shooting
frequent asked questions in our website: www.bluetrek.com. to find out more.

Answering a call

When the headset rings, press once on the TALK button to take the call.

Ending a call

Press once on the TALK button to end an active call.

Adjusting the volume

Adjust the volume from your mobile phone during an active call.

Muting the microphone

Mute the microphone from your mobile phone during an active call.
7 I BLUETREK SENSE