Table of Contents
Advertisement
Mobile phone with voice recognition
• Make sure the voice recognition function on your mobile is activated and your voice tags have
been recorded with the phone.
• Press the TALK button shortly (when there is no incoming and no active Call). The audio
connection is established.
• Wait for the audio signal sent by the mobile phone (generally a short tone).
• Speak out the name of person you wish to call, as stored in the phone voice tags. The mobile
phone will dial the stored number.
Mobile without voice recognition
• Make sure both the headset and the mobile phone are ON and in stand-by mode.
• Dial the phone number you wish to call on your mobile phone.
• After roughly 2 seconds, the audio connection is established.
6. Answering a call
When the headset rings, press the TALK button shortly.
7. Rejecting a call
Press the TALK button for about 2 seconds when the headset is ringing.
This function only works in the Hands-Free Profile.
8. Ending a call
Press the TALK button shortly to end an active call.
9. Redial Last Number
Press the TALK button for about 2 seconds if there is no active call and no incoming call, until you
hear a beep.
This function only works in the Hands-Free Profile.
Bluetrek G2 user guide l 8
Advertisement
Table of Contents
