Fault Finding Chart For Gsm1800 Transmitter - Nokia RH-37 Series Rf Troubleshooting Instructions

RH-37
6(b) - RF Troubleshooting Instructions
The setup should now look like this:
Now the measurement equipment should detect the following output signal of the
phone:
P = +21.5 dBm @ 1747.8 MHz
out
If this is not the case, then go to the EDGE fault finding chart for GSM1800 transmitter.

Fault finding chart for GSM1800 transmitter

In the following, it is assumed that the TXP signal is used as trigger signal. For that, a
TXP test point is provided.
Page 26
TX Data Type
Edge
Nokia Corporation
All 1
On
Nokia Customer Care
Issue 1 07/04