Nokia RH-37 Series Rf Troubleshooting Instructions page 8

RH-37
6(b) - RF Troubleshooting Instructions
In the RSSI Reading window, the <measuring mode> shall be set on Sum vector and the
<reading mode> on Continuous.
The set up should now look like this:
(The example below shows a screen shot in GSM900!)
Make the following settings on your signal generator:
Frequencies:
• GSM 900: 942.46771 MHz (channel 37+ 67.710 kHz offset)
• GSM 1800: 842.86771 MHz (channel 700 + 67.710 kHz offset)
• GSM 1900: 1960.06771 MHz (channel 661+ 67.710 kHz offset)
RF power level:
• – 80 dBm @ the antenna connector of the phone/ test jig
(remembering to compensate for the cable and jig attenuation).
Click on <Read now> in RSSI reading.
The resulting RSSI level shall be – 80 dBm +/– 0.5 dB in each band.
Page 8
RSSI reading
Nokia Corporation
Nokia Customer Care
R
Issue 1 07/04