Fault Finding Chart For Gsm1800 Transmitter - Nokia RM-94 Rf Troubleshooting Instructions

RM-94
Nokia Customer Care 6(b) - RF Troubleshooting
The setup should now look like this:
Now the measurement equipment should detect the following output signal of the phone:
P = +21.5 dBm @ 1747.8 MHz
out
If this is not the case, then go to the EDGE fault finding chart for GSM1800 transmitter.

Fault finding chart for GSM1800 transmitter

In the following, it is assumed that the TXP signal is used as trigger signal. For that, a TXP
test point is provided.
24 COMPANY CONFIDENTIAL Issue 1 04/2005
Copyright © 2005 Nokia. All Rights Reserved.