Status Led Indications - Brother DCP-310CN User Manual

Status LED indications

The status LED (Light Emitting Diode) is a light that shows the DCP
status.
LED DCP status
Ready
Off
Cover open
Ink empty
Paper error
Red
Out of memory
Others
1 - 4 INTRODUCTION
Description
The DCP is ready for use.
The cover is open. Close the cover. (See Error
messages on page 5-1.)
Replace the Ink cartridge with a new one. (See
Replacing the ink cartridges on page 5-20.)
Put paper in the tray or clear the paper jam.
Check the LCD message. (See Troubleshooting
and routine maintenance on page 5-1.)
Memory is full. (See Error messages on page
5-1.)
Check the LCD message. (See Troubleshooting
and routine maintenance on page 5-1.)