Brother DCP-310CN User Manual
  1. Manuals
  2. Brands
  3. Brother Manuals
  4. All in One Printer
  5. DCP-310CN
  6. User manual
Brother DCP-310CN User Manual

Brother DCP-310CN User Manual

Brother digital printer copier user's guide
Hide thumbs Also See for DCP-310CN:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual, Software User Manual
USER 'S GUIDE
DCP-110C
DCP-310CN
Version C

Advertisement

Table of Contents
loading

Related Manuals for Brother DCP-310CN

Summary of Contents for Brother DCP-310CN

  • Page 1 USER ’S GUIDE DCP-110C DCP-310CN Version C...
  • Page 2 Register your product on-line at http://www.brother.com/registration By registering your product with Brother, you will be recorded as the original owner of the product. ©1996-2004 Brother Industries, Ltd.

  • Page 3: Compilation And Publication Notice

    The contents of this manual and the specifications of this product are subject to change without notice. Brother reserves the right to make changes without notice in the specifications and materials contained herein and shall not be responsible for any damages (including consequential) caused by reliance on the materials presented, including but not limited to typographical and other errors relating to the publication.

  • Page 4: Safety Precautions

    Safety precautions To use the DCP safely Please refer to these instructions for later reference and before attempting any maintenance. WARNING There are high voltage electrodes inside the DCP. Before you clean the DCP, make sure you have unplugged the power cord from the electrical socket.
  • Page 5 WARNING This product must be installed near an electrical socket that is easily accessible. In case of emergencies, you must disconnect the power cord from the electrical socket in order to shut off power completely. Caution To maintain the best print quality, we recommend that you use the On/Off key to turn off your DCP.

  • Page 6: Choosing A Location

    Choosing a location Place your DCP on a flat, stable surface that is free of vibration and shocks, such as a desk. Put the DCP near a standard, grounded electrical socket. Choose a location where the temperature remains between 10° and 35°C. Caution ■...

  • Page 7: Table Of Contents

    Table of Contents Introduction ... 1-1 Using this Guide ... 1-1 Finding information ... 1-1 Symbols used in this Guide ... 1-1 Control panel overview ... 1-2 Status LED indications ... 1-4 Load documents ... 1-5 Using the scanner glass ... 1-5 About paper ...
  • Page 8 Using PhotoCapture Center Using PhotoCapture Center Important information ... 4-1 For your safety... 4-1 IT power system (Norway only) ... 4-1 LAN connection (DCP-310CN only) ... 4-1 International E Statement ... 4-1 Important safety instructions... 4-2 Trademarks... 4-4 Troubleshooting and routine maintenance ... 5-1 Troubleshooting ...
  • Page 9 Specifications ...S-1 Product description ...S-1 General...S-1 Print media ...S-2 Copy ...S-3 PhotoCapture Center Scanner ...S-5 Printer ...S-6 Interfaces...S-6 Computer requirements ...S-7 Consumable items...S-8 Network (LAN) (DCP-310CN only) ...S-9 Optional External Wireless Print/Scan Server (NC-2200w) ...S-9 Index ... I-1 ™ ...S-4...

  • Page 10: Introduction

    Introduction Using this Guide Thank you for buying a Brother Digital Copier/Printer (DCP). Your DCP is simple to use, with LCD screen instructions to guide you through programming it. You can make the most of your DCP by reading through this Guide.

  • Page 11: Control Panel Overview

    Control panel overview Copy keys (Temporary settings): Copy Options You can quickly and easily select temporary settings for copying. Enlarge/Reduce Lets you enlarge or reduce copies depending on the ratio you select. Copy Quality Use this key to temporarily change the quality for copying.
  • Page 12 Stop/Exit Stops an operation or exits from the menu. Mono Start Lets you start making copies in black and white. Also, let you start a scanning operation (in colour or black, depending on the scanning setting on your PC). Colour Start Lets you start making copies in full colour.

  • Page 13: Status Led Indications

    Status LED indications The status LED (Light Emitting Diode) is a light that shows the DCP status. DCP status Ready Cover open Ink empty Paper error Out of memory Others 1 - 4 INTRODUCTION Description The DCP is ready for use. The cover is open.

  • Page 14: Load Documents

    Load documents You can copy and scan from the scanner glass. Using the scanner glass You can use the scanner glass to copy or scan pages of a book or one page at a time. Documents can be up to A4 size (21.6 to 29.7 cm).

  • Page 15: About Paper

    Recommended Paper To get the best print quality, we suggest using Brother paper. (See table below.) If Brother paper is not available in your country, we recommend testing various papers before purchasing large quantities.

  • Page 16: Handling And Using Special Paper

    Handling and using special paper ■ Store paper in its original packaging, and keep it sealed. Keep the paper flat and away from moisture, direct sunlight and heat. ■ The coated side of glossy paper is shiny. Avoid touching the shiny (coated) side.
  • Page 17 1 - 8 INTRODUCTION...

  • Page 18: Paper Weight, Thickness And Capacity

    Paper weight, thickness and capacity Paper Type Cut Paper Plain Paper Inkjet Paper Glossy Paper Cards Photo Card Index Card Post Card Envelopes Transparencies * Up to 50 sheets for Legal size paper (80 g/m * Up to 100 sheets of 80 g/m Paper capacity of the output paper tray Output Paper Up to 25 sheets of 80 g/m...

  • Page 19: Printable Area

    Printable area The figures below show the unprintable areas on cut sheet paper and envelopes. Cut Sheet Paper ■ unprintable area 1Top Cut Sheet 3 mm (0 mm)* Envelopes 12 mm When you set the Borderless feature to On. ■ Printable area depends on the Printer driver settings.

  • Page 20: How To Load Paper, Envelopes And Post Cards

    How to load paper, envelopes and post cards To load paper or other media Pull the paper tray completely out of the DCP and remove the output paper tray. Press and slide the paper side guide to fit the paper width. Paper Side Guide Pull out the paper support and unfold the paper support flap.
  • Page 21 Fan the stack of paper well to avoid paper jams and mis-feeds. Gently insert the paper into the paper tray print side down and the leading edge (top of the paper) in first. Check that the paper is flat in the tray and below the maximum paper mark.

  • Page 22: To Load Envelopes

    To load envelopes ■ Use envelopes that weigh from 75-95 g/m ■ Some envelopes require margin settings in the application. Make sure you do a test print first. To prevent possible damage to the feeding mechanism, do not use the types of envelopes shown below. DO NOT USE ENVELOPES: ■...

  • Page 23: To Load Post Cards

    Insert the envelopes into the paper tray with the address side down and the leading edge (top of the envelopes) in first. Slide the paper side guide to fit the width of the envelopes. If you have problems when printing on envelopes, try the following suggestions: Open the envelope flap.

  • Page 24: Making Copies

    Making copies Using the DCP as a copier You can use your DCP as a copier, making up to 99 copies at a time. Making a single copy Load your document. Mono Start Press To stop copying, press Making multiple copies Load your document.

  • Page 25: Using The Copy Keys (Temporary Settings)

    Using the Copy keys (Temporary settings) When you want to quickly change the copy settings temporarily for the next copy, use the temporary Copy keys. You can use different combinations. Temporary Copy keys These settings are temporary, the DCP returns to its default settings 60 seconds after it finishes copying.

  • Page 26: Increasing Copy Speed Or Quality

    Increasing copy speed or quality You can select the copy quality. The default setting is Normal . Copy Quality Press Load your document. Copy Quality Press ( Fast , Normal or Best ). Mono Start Press —OR— Press other temporary copy keys for more settings. Recommended mode for ordinary Normal printouts.

  • Page 27: Enlarging Or Reducing The Image Copied

    Enlarging or reducing the image copied You can select the following enlargement or reduction ratios. Custom(25-400%) allows you to enter a ratio from 25% to 400%. Enlarge/Reduce Press 2 - 4 MAKING COPIES Custom(25-400%) 200% 198% 10x15cm→A4 186%10x15cm→LTR 142% A5→A4 104% EXE→LTR 100% 97% LTR→A4...
  • Page 28 Load your document. Enlarge/Reduce Press Press to select the enlargement or reduction ratio you want. Press —OR— You can select Custom(25-400%) and press Press to enter an enlargement or reduction ratio from 25% to 400% . Press Enlargement or reduction ratio can also be increased/decreased by holding down Mono Start Press...

  • Page 29: Changing The Temporary Copy Settings

    Changing the temporary copy settings Copy Options Use the settings temporarily for the next copy. Press Copy Menu Selections Options Select & Set Paper Type Paper Size Brightness Page Layout After you choose your settings by pressing Set temporarily and then returns to Menu selections. Mono Start Press settings.

  • Page 30: Setting Paper Type

    Setting paper type If copying on paper other than plain paper, select the type of paper that you are using to get the best print quality. Load your document. Copy Options Press Press Press ( Plain , Inkjet , Glossy or Transparency ). Press Mono Start Press...

  • Page 31: Adjusting Brightness

    Adjusting brightness You can adjust the copy brightness to make copies darker or lighter. Load your document. Copy Options Press Press Press to make a lighter copy. —OR— Press to make a darker copy. Press Mono Start Press —OR— Press 2 - 8 MAKING COPIES to select Brightness .

  • Page 32: Making N In 1 Copies Or A Poster

    Making N in 1 copies or a poster (Page Layout) You can reduce the amount of copies by using the N in 1 copy feature. This allows you to copy two or four pages onto one page, allowing you to save paper. It is also possible to create a poster. When you use the Poster feature your DCP divides your document into sections, then enlarges the sections so you can assemble them into a poster.
  • Page 33 If Glossy has been selected in the Paper Type setting for N in 1 copies, the DCP will print the images as if Normal paper had been selected. ■ If you are producing multiple colour copies, N in 1 copies are not available.
  • Page 34 Poster (3x3) You can make a poster size copy of a photograph. For Poster copies, you cannot make more than one copy. MAKING COPIES 2 - 11...

  • Page 35: Changing The Default Copy Settings

    Changing the default copy settings You can save the copy settings you use most often by setting them as default. These settings will remain until you change them again. Setting Paper Type To get the best print quality, set the DCP for the type of paper you are using.

  • Page 36: Setting Paper Size

    Setting Paper Size You can use five sizes of paper for printing your copies: Letter, Legal, A4, A5 and Photo Card (10x15cm). When you change the type of paper you load in the DCP, you will need to change the setting for Paper Size at the same time so your DCP can fit the copy on the page.

  • Page 37: Adjusting Brightness

    Adjusting brightness Menu Press Press Press Press Press Press to make a lighter copy. —OR— Press to make a darker copy. Press Stop/Exit Press Adjusting contrast You can change the contrast to help an image look sharper and more vivid. Menu Press Press...

  • Page 38: Adjusting Colour Saturation

    Adjusting Colour saturation Menu Press Press Press Press Press Press Press Press to increase the colour saturation. —OR— Press to decrease the colour saturation. Press Return to Step 4 to select the next colour. —OR— Stop/Exit Press to select 1.Copy . to select 6.Color Adjust .

  • Page 39: Legal Limitations

    Legal limitations Colour reproductions of certain documents are illegal and may result in either criminal or civil liability. This memorandum is intended to be a guide rather than a complete listing of every possible prohibition. In case of doubt, we suggest that you check with relevant authorities as to any particular questionable documents.

  • Page 40: Walk-Up Photocapture Center

    Walk-Up PhotoCapture Center Introduction Even if your DCP is not connected to your computer, you can print photos directly from the digital camera media. Your Brother DCP includes five media drives (slots) for use with popular digital camera media: CompactFlash ™...

  • Page 41: Photocapture Center Requirements

    PhotoCapture Center To avoid error conditions, please remember: ■ The DPOF file on the media card must be in a valid format. (See DPOF printing on page 3-8.) ■ The image file extension must be .JPG (Other image file extensions .JPEG, .TIF, .GIF and so on will not be recognized). ■...

  • Page 42: Getting Started

    Getting started Firmly insert the card into the appropriate slot. ™ SecureDigital ® Memory Stick SmartMedia PhotoCapture key indications: ■ PhotoCapture light is ON, the media card is inserted properly. ■ PhotoCapture light is OFF, the media card is not properly inserted. ■...
  • Page 43 The steps below give a brief outline of the Direct Printing feature. Please see the remaining pages of this chapter for more detailed instructions. Insert the media card firmly into the media drive (slot). When you insert your media card into the proper slot, the LCD shows: The media active message will be shown for 60 seconds and then disappear.

  • Page 44: Printing The Index (Thumbnails)

    Printing the Index (Thumbnails) The PhotoCapture Center No.1, No.2, No.3, and so on). It does not recognize any other numbers or file names that your digital camera or PC have used to identify the pictures. You can print a thumbnail page (Index page with 6 or 5 images per line). This will show all the pictures on the media card.

  • Page 45: Printing Images

    Printing images Before you can print an individual image, you have to know the image number. Print the Index first. (See Printing the Index (Thumbnails) on page 3-5.) Make sure you have inserted the media card. PhotoCapture Press Press Print Images . Press If your media card contains valid DPOF information, the LCD shows DPOF Print:Yes , please go to DPOF printing on page...
  • Page 46 Paper Type & Paper Size Press ( Letter Glossy , 10x15cm Glossy , 13x18cm Glossy , A4 Glossy , Letter Plain , A4 Plain , Letter Inkjet , A4 Inkjet or 10x15cm Inkjet ). Press If you selected A4 or Letter , go to Step 6. If you selected another size, go to Step 7.

  • Page 47: Dpof Printing

    DPOF printing DPOF stands for Digital Print Order Format. Major Digital Camera manufacturers (Canon Inc., Eastman Kodak Company, Fuji Photo Film Co. Ltd., Matsushita Electric Industrial Co. Ltd. and Sony Corporation.) created this standard to make it easier to print images from a digital camera. If your digital camera supports DPOF printing, you will be able to select on the Digital Camera display the images and number of copies you want to print.

  • Page 48: Changing The Default Settings

    Changing the default settings You can save the PhotoCapture Center by setting them as default. These settings will remain until you change them again. Increasing print speed or quality Menu Press Press Press Press Press Press Press Stop/Exit Press Setting paper and size Menu Press Press...

  • Page 49: Adjusting Brightness

    Adjusting brightness Menu Press Press Press Press Press Press to make a lighter print. —OR— Press to make a darker print. Press Stop/Exit Press Adjusting contrast You can choose the contrast setting. More contrast will make an image look sharper and more vivid. Menu Press Press...

  • Page 50: Colour Enhancement

    Colour enhancement You can turn on the colour enhancement feature to print more vivid images. Printing time will be slower. Menu Press Press Press Press Press Press Press —OR— Select Off and press If you select On , you can customize the White Balance, Sharpness or Colour Density.
  • Page 51 ■ White Balance This setting adjusts the hue of the white areas of an image. Lighting, camera settings and other influences will effect the appearance of white. The white areas of a picture may be slightly pink, yellow or some other colour. By using this adjustment you can correct this effect and bring the white areas back to pure white.

  • Page 52: Cropping

    Cropping If your photo is too long or wide to fit the available space on your selected layout, part of the image will be automatically cropped. The default setting is On . If you want to print the whole image, turn this setting to Off .

  • Page 53: Borderless

    Borderless This feature expands the printable area to fit the edges of the paper. Printing time will be slightly slower. Menu Press Press Press Press Press Press Press Stop/Exit Press Understanding the Error Messages Once you are familiar with the types of errors that can occur while you’re using the PhotoCapture Center troubleshoot any difficulties.

  • Page 54: Using Photocapture Center

    Using PhotoCapture Center your PC You can access the media card that is in the media drive (slot) of the DCP from your PC. (See Using the PhotoCapture Center Software User’s Guide on the CD-ROM or Using the PhotoCapture ™ Center from a Macintosh MFC-5440CN) on page 8-47 in the Software User’s Guide on the...

  • Page 55: Important Information

    The purpose of the International E promote the development and popularization of energy-efficient office equipment. TAR ® As an E Partner, Brother Industries, Ltd. has determined NERGY that this product meets the E efficiency. 4 - 1 IMPORTANT INFORMATION ®...

  • Page 56: Important Safety Instructions

    Important safety instructions Read all of these instructions. Save them for later reference. Follow all warnings and instructions marked on the product. Unplug this product from the wall socket before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Do not use this product near water.
  • Page 57 Do not place anything in front of the DCP that will block printing. Do not place anything in the path of printing. Wait until pages have exited the DCP before picking them up. Unplug this product from the power socket and refer servicing to Authorized Service Personnel under the following conditions: ■...

  • Page 58: Trademarks

    Trademarks The Brother logo is a registered trademark of Brother Industries, Ltd. Brother is a registered trademark of Brother Industries, Ltd. Multi-Function Link is a registered trademark of Brother International Corporation. © 2004 Brother Industries, Ltd. All rights reserved. Windows and Microsoft are registered trademarks of Microsoft in the U.S.

  • Page 59: Troubleshooting And Routine Maintenance

    DCP identifies the problem and displays an error message. The most common error messages are shown below. You can correct most problems by yourself. If you need additional help, the Brother Solutions Center offers latest FAQs and troubleshooting tips. Visit us at http://solutions.brother.com.
  • Page 60 ERROR MESSAGES ERROR CAUSE MESSAGE One or more of the ink cartridges are running Near Empty out of ink. An ink cartridge is not properly installed. No Cartridge The media card in the media drive does not No File contain a .JPG file. The DCP is out of paper.

  • Page 61: Printer Jam Or Paper Jam

    Printer jam or paper jam Remove the jammed paper depending on where it is jammed in the DCP. Paper is jammed inside the paper tray Pull the paper tray out of the DCP. Pull up the jammed paper to remove it. 5 - 3 TROUBLESHOOTING AND ROUTINE MAINTENANCE Paper Tray Jammed paper...

  • Page 62: Paper Is Jammed Inside The Dcp

    Paper is jammed inside the DCP Remove the Jam Clear Cover. Pull the jammed paper out of the DCP. Re-insert the Jam Clear Cover. If you can not pull out the jammed paper, lift the scanner cover from the right-hand side of the DCP until it locks securely into the open position.
  • Page 63 Lift the scanner cover to release the lock. Gently push the scanner cover support and close the scanner cover. 5 - 5 TROUBLESHOOTING AND ROUTINE MAINTENANCE...

  • Page 64: If You Are Having Difficulty With Your Dcp

    If you are having difficulty with your DCP If you think there is a problem with your DCP, check the chart below and follow the troubleshooting tips. The Brother Solutions Center offers latest FAQs and troubleshooting tips. Visit us at http://solutions.brother.com.
  • Page 65 Try to reduce the print resolution. Sometimes you may see vertical streaks on copies. Clean the scanner. (See Cleaning the scanner on page 5-18.) Make sure the Brother TWAIN/WIA driver is selected as the primary ® source. In PaperPort , click Scan in the File menu and select the...
  • Page 66 Make sure you have inseted the media card into the media slot. Disk from Desktop icon. Network Difficulties (DCP-310CN only) I cannot print over the network Make sure that your DCP is powered on and is On Line and in Ready mode.

  • Page 67: How To Change Lcd Language

    How to change LCD language You can change the LCD language. Menu Press Press Press Press Press Press Press Stop/Exit Press How to improve the LCD viewing You can adjust the LCD contrast for a sharper and more vivid display. If you are having difficulty seeing the LCD from your position, try to change the contrast settings for improved viewing.

  • Page 68: How To Improve Print Quality

    DCP will go back to standby mode automatically. If you clean the print head at least five times and the print has not improved, call your Brother dealer for service. TROUBLESHOOTING AND ROUTINE MAINTENANCE 5 - 10 to select Cleaning .

  • Page 69: Checking The Print Quality

    Checking the print quality If faded or streaked colours and text appears on your output, some of the nozzles may be clogged. You can check this by printing the Print Quality Check Sheet and looking at the nozzle check pattern. Ink Management Press Press...
  • Page 70 Quality Check Sheet. If the problem still exists, repeat the cleaning and test print procedures at least five times for the new ink cartridge. If ink is still missing, call your Brother dealer for service. Caution Do NOT touch the print head. Touching the print head may cause permanent damage and may void the print head’s warranty.

  • Page 71: Checking The Printing Alignment

    Checking the printing alignment You should rarely need to adjust the printing alignment however, if after transporting the machine your printed text becomes blurred or images become faded then adjustment may need to be made. Ink Management Press Press Press Press Press Mono Start...

  • Page 72: Checking The Ink Volume

    Checking the ink volume You can check the ink that is left in the cartridge. Ink Management Press Press Ink Volume . Press Press The LCD shows the ink volume. Stop/Exit Press TROUBLESHOOTING AND ROUTINE MAINTENANCE 5 - 14 to select to select the colour you want to check.

  • Page 73: Packing And Shipping The Dcp

    Packing and shipping the DCP Whenever you transport the DCP, use the packing materials that came with your DCP. If you do not pack the DCP properly, you could void your warranty. Caution It is important to allow the DCP to ‘park’ the print head after a print job.
  • Page 74 Lift the scanner cover to release the lock. Gently push the scanner cover support down and close the scanner cover. Unplug the DCP from the electrical socket. Unplug the USB cable or LAN cable from the DCP, if it is connected.
  • Page 75 Pack the printed materials in the original carton as shown below. Do not pack the used ink cartridges in the carton. Close the carton. 5 - 17 TROUBLESHOOTING AND ROUTINE MAINTENANCE...

  • Page 76: Routine Maintenance

    Routine maintenance Cleaning the scanner Lift the document cover. Clean the scanner glass with isopropyl alcohol on a soft lint-free cloth. Document Cover Clean the glass strip under the film with isopropyl alcohol on a lint-free cloth. Glass Strip TROUBLESHOOTING AND ROUTINE MAINTENANCE 5 - 18...

  • Page 77: Cleaning The Dcp Printer Platen

    Cleaning the DCP printer platen ■ Be careful not to touch the paper feed star wheels or encoder film. ■ Be sure to unplug the DCP from the electrical socket before cleaning the printer platen. ■ If ink is scattered on or around the printer platen be sure to wipe it off with a soft, dry, lint-free cloth.

  • Page 78: Replacing The Ink Cartridges

    Replacing the ink cartridges Your DCP is equipped with an ink dot counter. The ink dot counter automatically monitors the level of ink in each of the four cartridges. When the DCP detects an ink cartridge is running out of ink, the DCP will notify you with a message on the LCD.
  • Page 79 Remove the cartridge covers. Cartridge Cover Do not touch the area shown in the illustration above. If the cartridge cover comes off when you open the bag the cartridge will not be damaged. Each colour has its own correct position. Keep the ink cartridge in an upright position when you insert it into slot.
  • Page 80 If you replaced an ink cartridge while Near Empty was displayed on the LCD, the LCD may ask you to verify that it was a brand new one. Example: Did You Change Blck? ▲ Yes ▼ No . For each new cartridge you installed, press automatically reset the ink dot counter for that colour.
  • Page 81 If damage is caused to the print head or other parts of this machine as a result of the use of ink or ink cartridges other than genuine Brother products due to the incompatibility or lack of suitability of those products with this machine, any repairs required as a result will not be covered by the warranty.

  • Page 82: Appendix

    Menu table that begins on page A-3. These pages will help you understand the menu selections and options that are found in the DCP’s programs. Printing reports The following reports are available. 1.Help List 2.User Settings 3.Network Config (DCP-310CN only) Menu Press Press Press Press Press Mono Start...

  • Page 83: Menu Mode

    Menu Mode You can access the menu mode by pressing When you enter the menu, the LCD scrolls. 1.Copy 2.PhotoCapture 0.Initial Setup You can scroll more quickly through each menu level by pressing the arrow for the direction you want: Select an option by pressing LCD.
  • Page 84 Select Main Menu Submenu 1.Copy 1.Paper Type 2.Paper Size 3.Quality 4.Brightness 5.Contrast The factory settings are shown in Bold. Select Menu Options Selections — Plain Inkjet Glossy Transprncy — Letter Legal 10x15cm — Best Normal Fast — — exit accept Descriptions Page Sets the type of...
  • Page 85 Main Menu Submenu 1.Copy 6.Color Adjust (Continued) 2.PhotoCapture 1.Print Quality 2.Paper & Size 3.Brightness 4.Contrast The factory settings are shown in Bold. A - 4 APPENDIX Menu Options Selections 1.Red 2.Green 3.Blue — Normal Photo — Letter Glossy 10x15cm Glossy 13x18cm Glossy A4 Glossy Letter Plain...
  • Page 86 Main Menu Submenu 2.PhotoCapture 5.Color Enhance (Continued) 6.Cropping 7.Borderless 8.Scan to Card The factory settings are shown in Bold. See the complete Software User’s Guide on the CD-ROM. Menu Options Selections Enhance:On 1.White Balance Enhance:Off 2.Sharpness 3.Color Density — — 1.Quality B/W 200x100 dpi B/W 200 dpi...
  • Page 87 Main Menu Submenu 3.LAN 1.Setup (DCP-310CN TCP/IP only) 2.Setup Misc. 0.Factory Reset The factory settings are shown in Bold. A - 6 APPENDIX Menu Options Selections 1.BOOT Auto Method Static RARP BOOTP DHCP [000-255]. 2.IP Address [000-255]. [000-255]. [000-255] [000-255].
  • Page 88 Main Menu Submenu 3.Print 1.Help List Reports 2.User (DCP-110C Settings only) 4.Print 3.Network Reports Config (DCP-310CN (DCP-310CN only) only) 0.Initial 1.Date/Time Setup 2.LCD Contrast 0.Local Language (For UK , Ireland, Germany, Austria, Belgium, France, Holland and Switzerland) 0.Local Language (For Italy, Spain and Portugal) 0.Local...

  • Page 89: Specifications

    8 MB (DCP-110C) 16 MB (DCP-310CN) 100 Sheets (80 g/m Ink Jet Piezo with 74 x 5 nozzles 16 characters x 1 line (DCP-110C) 16 characters x 2 lines (DCP-310CN) 220 - 240V 50/60Hz (DCP-110C) Power Save Mode: Under 3 watts Standby: 6.5 Wh or less (25...

  • Page 90: Print Media

    Weight Noise Temperature Humidity Print media Paper Input Paper Output 5.0 kg Operating: 42.5 to 51 dB* * It depends on printing conditions Operating: 10 - 35 °C Best Print Quality: 20 - 33 °C Operating: 20 to 80% (without condensation) Best Print Quality: 20 to 80% (without condensation)

  • Page 91: Copy

    Colour Up to 11 pages/minute (A4 paper)* * Does not include the time it takes to feed the paper. Based on Brother standard pattern. (Fast mode) Copy speeds vary with the complexity of the document. Up to 99 pages 25% to 400% (in increments of 1%)

  • Page 92: Photocapture Center

    PhotoCapture Center Available Media File Extension (Media Format) (Image Format) Number of Files Folder Borderless ™ ® CompactFlash (Type I only) ™ (Microdrive is not compatible) (Compact I/O card such as Compact LAN card and Compact Modem card are not supported.) ®...

  • Page 93: Scanner

    Up to 600 × 2400 dpi (optical) * Maximum 1200 x 1200 dpi scanning with Windows (resolution up to 19,200, x 19,200 dpi can be selected by using the Brother scanner utility) Colour: up to 5.93 sec. Black: up to 3.76 sec.

  • Page 94: Printer

    20 pages/minute (Black)* up to 15 pages/minute (Colour)* * Based on Brother standard pattern. A4 size in draft mode. Does not include the time it takes to feed the paper. 204 mm(216mm)* * When you set the Borderless feature to On.

  • Page 95: Computer Requirements

    Microsoft Internet Explorer 5 or greater. Maximum 1200 x 1200 dpi scanning with Windows selected using the Brother Utility.) Dedicated “Scan” key and direct Network Scanning (DCP-310CN only) supported in Mac ® Systems Mac OS X 10.2.4 or greater. S - 7 SPECIFICATIONS...

  • Page 96: Consumable Items

    Consumable items Service Life of Ink Cartridge Replacement Consumables The DCP uses individual Black, Yellow, Cyan and Magenta ink cartridges that are separate from the print head assembly. Black - Approximately 500 pages at 5% coverage Yellow, Cyan and Magenta - Approximately 400 pages at 5% coverage The above figures are based upon the following assumptions:...

  • Page 97: Network (Lan) (Dcp-310Cn Only

    Network (LAN) (DCP-310CN only) Support for: Protocols Optional External Wireless Print/Scan Server (NC-2200w) NC-2200w External Wireless Print/Scan Server (Optional) Network types Support for Protocols S - 9 SPECIFICATIONS You can connect your machine to a network for Network Printing, Network Scanning. Also included is Brother BRAdmin Professional Network Management software.

  • Page 98: Index

    Index Cleaning print head ... 5-10 printer platen ... 5-19 scanner ... 5-18 Consumable items ...S-8 Control panel overview ... 1-2 Copy brightness ... 2-8 Colour adjustment ... 2-15 contrast ... 2-14 default settings ... 2-12 Enlarge/Reduce ...2-4 keys ... 2-2 multiple ...
  • Page 99 ™ xD-Picture Card ... 3-1 Print area ... 1-10 difficulties ... 5-6 drivers ... S-6 improving quality ... 5-10 paper jams ... 5-3 resolution ... S-6 specifications ... S-6 Quality key (copying) ... 2-2 Reducing copies ... 2-4 Reports Help List ... A-1 how to print ...
  • Page 100 Visit us on the World Wide Web http://www.brother.com UK/GEN/OCE/ASA LF51810043...

This manual is also suitable for:

Dcp-110c

Table of Contents