Brother DCP-310CN User Manual page 12

3
Stop/Exit
Stops an operation or exits from the
menu.
4
Mono Start
Lets you start making copies in
black and white.
Also, let you start a scanning
operation (in colour or black,
depending on the scanning setting
on your PC).
5
Colour Start
Lets you start making copies in full
colour.
Also, let you start a scanning
operation (in colour or black,
depending on the scanning setting
on your PC).
6
On/Off
You can turn the DCP on or off.
Even if you turned the DCP off, it will
periodically clean the print head to
preserve print quality.
7
Ink Management
Lets you clean the print head, check
the print quality and the available ink
volume.
8
Scan
Lets you access Scan mode.
9
PhotoCapture
Lets you access the PhotoCapture
™
Center .
0
Liquid Crystal Display (LCD)
Displays messages on the screen to
help you set up and use your DCP.
The LCD examples in this guide are
for models with a one-line display.
There may be slight differences
between the examples provided
and models with a two-line display.
A
Light-Emitting Diode (LED)
The LED will show the DCP status.
INTRODUCTION 1 - 3