Delivery; Transport And Storage; Safety Instructions For Transport - Siemens SIMOTICS SD 1LE5 Operating Instructions Manual

Preparing for use

4.4 Delivery

4.4 Delivery
Checking the delivery for completeness
The drive systems are put together on an individual basis. When you take receipt of the
delivery, please check immediately whether the items delivered are in accordance with the
accompanying documents. Siemens will not accept any claims relating to items missing from
the delivery and which are submitted at a later date.
• Report any apparent transport damage to the delivery agent immediately.
• Report any apparent defects/missing components to the appropriate SIEMENS office
immediately.
Archive the safety and commissioning notes provided in the scope of delivery as well as the
optionally available operating instructions so that these documents are always easily
accessible.
The rating plate optionally enclosed as a loose item with the delivery is provided to enable
the motor data to be attached on or near the machine or installation.
4.5

Transport and storage

4.5.1

Safety instructions for transport

Observe the following when carrying out any work on the machine:
• Comply with the general safety instructions (Page 11).
• Comply with the applicable national and sector-specific regulations.
• When using the machine within the European Union, comply with the specifications laid
down in EN 50110-1 regarding safe operation of electrical equipment.
The information required to correctly attach, lift and transport the machine - such as weight,
center of gravity and attachment points - is provided here:
• Machine dimension drawing and the associated explanations or the technical data
• Transport data
• Rating plate and lifting plate, if available
• Shipping parts list
• Packaging
28
1LE5, 1PC4 shaft height 315/355
Operating Instructions, 10/2020, A5E41454666A