Specifications; Maintenance And Repairs - Stihl SR 5600 Instruction Manual

Specifications

Engine
Single cylinder two-stroke engine
Displacement: 56.5 cm
Cylinder bore: 46 mm
Piston stroke: 34 mm
Engine power
according to 2.2 kW (3.0 HP)
ISO 7293: at 7,500 rpm
Idle speed: 2800 rpm
Ignition system
Electronic magneto ignition
Spark plug: NHSP LD L9T
Electrode gap: 0.5 mm
Fuel system
All position diaphragm carburetor with
integral fuel pump
Fuel tank capacity: 1600 cm
Spraying attachment
Container capacity: 14 l
Remaining quantity in
container: 0.1 l
SR 5600
Size of filler strainer
mesh:
Discharge rate:
maximum spray width
horizontal:
Weight
3
unfilled, without
blower tube
assembly:
3
(1.6 l)

Maintenance and Repairs

1 mm
see "Metering
Users of this machine may only carry out
unit"
the maintenance and service work
described in this user manual. All other
12 m
repairs must be carried out by a
servicing dealer.
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
servicing dealer. STIHL dealers are
9.7 kg
regularly given the opportunity to attend
training courses and are supplied with
the necessary technical information.
When repairing the machine, only use
replacement parts which have been
approved by STIHL for this power tool or
are technically identical. Only use high-
quality replacement parts in order to
avoid the risk of accidents and damage
to the machine.
STIHL recommends the use of original
STIHL replacement parts.
Original STIHL parts can be identified by
the STIHL part number, the {
logo and the STIHL parts symbol K
(the symbol may appear alone on small
parts).
English
27