Harness - Stihl SR 5600 Instruction Manual

English
1
Slip hose clip over the end of the
N
short hose.
Push the liquid hose (1) onto the
N
stub on the metering unit and
secure with a hose clip.
1 4 4
Use hose clips (4) to secure
N
hose (1) from the container and
hose (3) to the metering unit to the
stubs on the stop cock.
Close the stop cock (lever at right
N
angle to control handle).
Fill up with water and check all hose
N
connections for leaks.
10
Adjusting the Control Handle
Put the unit on your back.
N
Loosen the clamp screw (1).
N
Move the control handle (2) along
N
the tube to the most comfortable
position.
3
Tighten down the clamp screw (1)
N
firmly.
2
1

Harness

Attaching the Harness
Attach strap hook to the backplate.
N
Adjusting the Harness
Pull the ends of the straps
N
downward to tighten the harness.
SR 5600