Gas Supply; Power Supply - Blodgett XR8-G Specifications

XR8-G Rotating Rack Oven
DIMENSIONS ARE IN INCHES (MM)
SHORT FORM SPECIFICATIONS
Provide Blodgett gas mini rotating rack bakery oven model XR8-G. Unit shall have a single compartment with fully welded angle iron frame, and 304 stainless steel interior. Unit shall accept
eight I8" x 26" standard full-size bake pans and have rack slides with spacing that can be adjusted without tools in any configuration using 1" increments. Rotating rack shall be remov-
able without tools. Unit shall have stainless steel front, top and sides. Doors shall be stainless steel, independent design with dual pane thermal glass windows. Unit shall be gas heated
with electronic spark ignition and shall cook by means of indirect fired inshot burners. Unit shall have internal steamer system with pre-plumbed water lines. Unit shall be fitted with four side
mounted, halogen lamps. Control panel shall be digital programmable controls, separate bake and steam times, cool-down mode, and blower delay. Manual gas service cut-off switch on
front panel. Two year oven parts and one year labor warranty. Provide options and accessories as indicated.
DIMENSIONS:
Floor space 48.23" (1225 mm) W x 40.27" (1023 mm) D
Interior 32" (813 mm) W x 32" (813 mm) D
Product clearance
0" from combustible and non-combustible construction

GAS SUPPLY:

3/4" NPT
Manifold Pressure:
• Natural – 3.5" W.C
Inlet Pressure:
• Natural – 5.0" W.C. min. – 14.0" W.C. max.
• Propane – 11.0" W.C. min. – 14.0" W.C. max.
MAXIMUM INPUT:
XR8-G 110,000 BTU/hr

POWER SUPPLY:

XR8-G 120V, 60Hz, 1 phase, 15 amp maximum dedicated circuit
NOTE: The company reserves the right to make substitutions of components without prior notice
44 Lakeside Avenue, Burlington, VT 05401 • Toll Free: (800) 331-5842 • Phone: (802) 860-3700 • Fax: (802) 864-0183
Printed in U.S.A.
48.23 (1225)
14.43 (367)
8.53 (217)
2.78 (71)
EXHAUST
5.45
(138)
53.03
(1347)
TOP VIEW
• Propane – 10" W.C.
BLODGETT OVEN COMPANY
NOTE: FOR COMMERCIAL USE ONLY
D
W
COLD WATER SUPPLY:
Pipe Size
Pressure
Flow Rate
DRAIN:
XR8-G
MINIMUM ENTRY CLEARANCE:
Uncrated*
Crated
* Unit will fit through standard 36" door with the doors, control panel, and back
panel removed.
SHIPPING INFORMATION:
Approx. Weight:
XR8-G
Stand
Crate sizes:
XR8-G
Stand
www.blodgett.com
APPROVAL/STAMP
40.27 (1023)
75.53 (1918)
47.44 (1205)
37.83 (961)
32.60 (828)
28.32 (719)
26.03 (661)
0
SIDE VIEW
3/4" GHT
30-75 psi. (21-52 kPa) minimum
1.12 gal/min (4.5 liters/min.)
3/4" NPT rear drain connection
33" (838 mm)
49.25" (1251mm)
950 lbs. (431 kg)
119 lbs. (54 kg)
49.25" (1251mm) x 54.25" (1378mm)
54" (1371mm) x 34" (864mm) x 24" (610mm)
W
D
P/N 38481 Rev J (3/08)