Setting A Position Marker; Storing The Position Marker - Blaupunkt RNS149 Operating Instructions Manual

Navigation

Setting a position marker

You can store your current vehicle position at any time, even during active route
guidance.
To store your current vehicle position,
Mark the menu item POSITION MARK in the DSC menu.
Note: You can also activate the position marker with the hotkey by
allocating the position marker function to the hotkey. For more in-
formation, refer to "Hotkey" in the chapter entitled "Set-up".
Press OK 8.

Storing the position marker

After you have pressed OK 8, a selection menu will appear. Here you can
choose whether you want to enter a name for the position marker or return to the
menu in which you set the position marker.
If you select the option SHORT N. and enter a name for the position marker, it
will be stored automatically in the destination memory.
Select the menu item SHORT N .
An edit menu which allows you to enter the short name will appear.
Enter a short name,
symbol and press OK 8,
Select the
or
Press OK 8 for longer than two seconds.
The position marker will be stored in the destination memory under the short
name entered.
If you select BACK , you will return to the menu in which the position marker was
set and the position marker will not be stored.
DSC menu for navigation
Edit menu
56