Table of Contents
Advertisement
4.
- Using a knife, cut through the carpet
directly above the screws of the
mounting bracket (B).
- Replace the carpet in its original po-
sition, so that the screws poke
through the carpet.
5.
- Using the hex bolts again, refasten
the changer on top of the carpet.
INSTALLATION
Installation Procedure
(Suspended Installation)
1.
- Make certain that the built in anti-vi-
bration armature has been set to the
"0" position on both the left and right
sides.
- Using the hex bolts (M4 x 5), fasten
the left and right brackets (A).
Position of the built-in
anti-vibration armature
Hex bolts
Hex bolts
15
Advertisement
Table of Contents
