Position Of The Built-In; Anti-Vibration Armature - Blaupunkt CDC A01 Operating And Installation Instructions

BEFORE INSTALLING THE EQUIPMENT
Position of the Built-in Anti-
Vibration Armature
This device can be installed horizontally
(suspended), vertically, or at a 45 ang-
le. Once you have chosen an installation
procedure, you have to set the position
of the built-in anti-vibration armature
accordingly. Please do this before
carrying out the procedures explained
below. Vibration may cause CDs to skip
if the equipment is used before the anti-
vibration system has been configured
correctly.
- The anti-vibration armature is set to
"0" (for horizontal installation) at the
factory before shipping.
- The built-in anti-vibration armature
adjusts on both the left and right
sides.
- Before attaching the brackets, use a
screwdriver to set the position of the

anti-vibration armature.

For horizontal or suspended instal-
lation:
Make certain that the built-in anti-vibra-
tion armature is set to the "0" position.
5