Table of Contents
Advertisement
INSTALLATION
4.
- Using a knife, cut through the carpet
directly above the bolts of the mount-
ing bracket (B).
- Replace the carpet in its original po-
sition, so that the bolts poke through
the carpet.
5.
- Using the hex bolts again, refasten
the changer on top of the carpet.
12
Installation Procedure for
Installation on Carpet
(Vertical Position)
1.
- Make certain that the built-in anti-vi-
bration armature has been set to the
"90" vertical installation position on
both the right and left sides.
- Using the hex bolts (M4 x 5), fasten
the left and right brackets (A).
- Fasten the left and right brackets (A)
to the corresponding brackets (B).
Do this using the hex bolts (M6 x 12)
and hex nuts (M6).
Hex bolts
(M4x5)
Position of the built-in anti-
vibration armature
Hex bolts
(M6x12)
Advertisement
Table of Contents
