Table of Contents
Advertisement
INSTALLATION
Installation Procedure for
Installation on Carpet
(at a 45 Angle)
1.
- Set the built-in anti-vibration arma-
ture to the 45 position "45" on both
the right and left sides.
- Using the hex bolts (M4 x 5), fasten
the left and right brackets (A).
- Fasten the left and right brackets (A)
to the corresponding brackets (B).
Do this using the hex bolts (M6 x 12)
and the hex nuts (M6).
Position of the built-in
anti-vibration armature
14
Hex bolts (M6x12)
Hex bolts
(M4x5)
2.
- Lift up the carpet and decide where
you want to mount the unit.
- Fasten the double-stick tape sup-
plied to the bottoms of the brackets
(B) and remove the protective back-
ing from the tape.
- Fasten the unit to the floor by press-
ing it down firmly.
3.
- Unscrew the hex nuts and remove
the CD changer.
Advertisement
Table of Contents
