Toro Greensmaster e1021 Operator's Manual page 12

To use the kickstand to install the transport wheels,
put your foot on the kickstand while pulling up and
back on the lift-assist handle
CAUTION
The machine is heavy and can cause back
strain if lifted improperly.
Put your foot pressure down on the
kickstand and use only the lift-assist
handle to raise the machine. Attempting to
raise the machine onto the kickstand any
other way can cause injury.
•
C -U -S
UTTING NIT ERVICE
To prevent the machine from tipping backward
when removing the cutting unit, lower the kickstand
and push out the spring pin so that it keeps the
kickstand in the position shown in
1. Lift-assist handle
2. Kickstand—S
TORAGE
position
(Figure 13).
position:
Figure
Figure 13
3. Kickstand—T
RANSPORT
S position
ERVICE
14.
1. Kickstand—C
S
ERVICE
g343381
-W
HEEL
12
Figure 14
-U 2. Spring pin
UTTING NIT
position
g341757