Alcatel 4038 Quick Start Manual

Handset (possibility of a wireless
En
handset - Bluetooth® - Alcatel 4068
only)
Socket for connecting headphones or a
Hands-free / Loudspeaker unit
Audio keys
Hang-up key: to terminate a call.
Hands-free/Loudspeaker Key: to make or answer a call without lifting the
receiver.
• Lit in hands-free mode or headset mode (short press).
• Flashing in loudspeaker mode (long press).
Intercom/Mute key
• During a conversation: press this key so that your
correspondent can no longer hear you.
• Terminal idle: press this key to answer calls automatically
without picking up the receiver.
To adjust the loudspeaker or handset volume up or down
Extension unit
An extension unit can be fitted to your tele-
phone. This provides additional keys which
can be configured as function keys, line keys,
call keys etc.
To affix labels: push the holding strip of
the unit backwards to you and lift it. Install
the label under the keypad, in the housing de-
signed for, and place the keypad back into
position.
Display and display keys
Contains several lines and pages providing information on calls and the functions accessible via the 10
keys associated with the words on the screen.
Divert icon: pressing the key next to this icon allows you to program or change the
LED
divert function.
• Flashing green: incoming call.
• Flashing orange: alarm.
Headset connected.
Silent mode activated.
Display keys: pressing a display key activates the function shown associated with it on
the screen.
Alphabetic keypad
Call display
Incoming call.
Call on hold*.
If you get two calls at the same time, you can
switch from one call to the other by pressing the
display key associated with each call.
Function keys and programmable keys
Appointment programmed.
Telephone locked.
Call in progress or outgoing call.
Left-right navigator: used to check calls.
Guide key: used to obtain information on functions of the "menu" page and to program
key of the "perso" page.
Messaging key to access various mail services:
if the key flashes, a new voice message or a new text message has been received.
"Redial" key: to access the "Redial" function.
Programmable key (F1 and F2 keys):
lit when the function associated with the key is activated.