Removing the Seat
Installing the Seat
Wheels, Brakes and Chassis: Service and Repairs
1. Park machine on a level surface, lower cutting units, stop engine, engage
parking brake, and remove key from the key switch.
2. Remove the four flange head bolts securing the seat support straps to the
frame.
3. Disconnect the electrical connector from the seat switch. Separate the seat
from the frame.
4. Remove seat parts as necessary to make repairs using
1. Install any new seat parts using
2. Position the seat and support straps to the fuel tank and frame.
3. Connect the electrical connector to the seat switch.
4. Secure the seat support straps to the frame with four flange head bolts.
Figure 149
Page 7–6
Figure 149
as a guide.
as a guide.
Reelmaster
®
3100-D/3105-D
20252SL Rev A