Function Keys For Special Features; Follow-Me; Call Waiting; Consultation Call - Siemens Profiset 3020 User Manual

Function keys for special features

This telephone features dedicated keys for
the following special functions:

• Follow-me

• Call waiting

• Conference

• Mailbox

Note:
These features will only be available if
you purchased them from your local
operator.
Follow-me
The follow-me feature allows
automatically transfer received calls to
another destination number. To activate
follow-me, proceed as follows:
Lift the handset
Press the FOLLOW-ME key (position
7 on page 5)
: Dial the new destination number
Press the FOLLOW-ME key (position
7 on page 5)
To deactivate the follow-me feature, press
the follow-me key
Call waiting
When you hear a camp-on tone during a
conversation, you can answer the waiting
call by pressing the Call waiting key
The first call will be put on hold.
If you want to return to the held call, press
the Call waiting key
manner, you can toggle between both
parties as often as you want. You can end
the conversation with either party by
you to
twice.
again. In this
pressing the Disconnect key
the last conversation, simply replace the
handset.

Consultation call

At any time during a conversation, you can
make a consultation call. Press the FLASH
key until you hear the dial tone. Then,
dial the desired number to initiate the
consultation call.
Once the consultation call has been
completed, you can either press the Call
waiting key
or the Disconnect key
conversation with one of the parties and
return to the held party.
Conference
The conference feature allows you to set up
a three-party conference. First, you must
set up two connections using the Call
waiting or Consultation
described above. Then, you can press the
Conference key
the conference.
Mailbox
The Mailbox feature allows messages to be
stored for subsequent retrieval. This feature
works by assigning an access code to the
Mailbox key (see Mailbox on page 10).
.
17
. To finish
to toggle between the calls
to end your
call
to add the third party to
features