Table of Contents
Advertisement
-
if throttle is "open" the instrument panel activates
the "CLOSE THROTTLE" (A, Fig. 23)indication;
only when throttle is "closed" the new selected
riding mode is confirmed and memorised, and
the instrument panel goes back to "standard
page" displaying;
-
if throttle is "closed" but brakes are operated, the
instrument panel activates the "RELEASE
BRAKES" (B, Fig. 23)indication and only when
brakes are released the new selected riding
mode is confirmed and memorised, and the
instrument panel goes back to standard page
displaying;
-
if throttle is "open" or if brakes are operated and
vehicle is moving, the instrument panel shows
"CLOSE THROTTLE AND RELEASE BRAKES"
(C, Fig. 23)and, only after all conditions are met
(closed throttle and brakes released or vehicle
stopped) the instrument panel confirms and
memorises the new selected riding mode and
goes back to "standard page" displaying.
If an on/off or off/on change of the ABS system is
associated to the Riding Mode change, when the
selected riding mode is confirmed, the instrument
panel also starts procedure to enable/disable the ABS
68
explained in "ABS enabling/disabling" (page 116)
(only possible in the ENDURO Riding Mode).
If the above-described conditions for "validating" the
change of Riding Mode are not observed within 5
seconds from when "CLOSE THROTTLE" or
"RELEASE BRAKES" or "CLOSE THROTTLE AND
RELEASE BRAKES" indications, the selection
procedure will be aborted and the instrument panel
will go back to displaying the page active before
Riding Mode selection started, and no settings will be
changed.
If you select "EXIT" and press button (4), the
instrument panel will display the main screen,
without storing the new setting (the new Riding
Mode).
Advertisement
Table of Contents
